2.4G无线DMX512收发模块 2.4G wireless DMX512 transceiver module

LED控制器, LED霓虹灯和控制器等

2.4G wireless DMX512 transceiver module

技术参数

1、工作电压：DC9~24V
2、工作电流：Max.150mA
3、发射功率：Max.20dBm
4、接收灵敏度：-94dBm
5、信号接口：DMX512
6、驱动尺寸：70*18*18（mm）
7、天线尺寸：85*9*9(mm)，线长100mm

操作说明 Operating Instructions:

Correspondence between ID code and LED color:
1) RED = red
2) GREEN = green
3) RED+GREED = yellow
4) BLUE = blue
5) RED+BLUE = purple
6) GREEN+BLUE = orange
7) RED+GREED+BLUE = white

ID setting:
Press the ID code function key once to display the current ID, and press it again to set the ID. The ID code value increases by 1 each time it is pressed.
Working status:
LED always on: no DMX or wireless signal
Red LED flashing: sending
Green LED flashing: receiving
RF frequency:
2.400—2.525G, a total of 126 frequency bands, automatically selected without setting.
ID code:
“1~7” group ID code, press the “ID code function key” to adjust, only transceivers with the same ID code (same color) can communicate with each other.

Establishment of communication:

Power on the transceiver, press the “ID code function key” to set the ID of the transceiver to be
communicated to the same. If more than one wireless network is to be used in the same place, each ID needs to be set to a different ID code (different color).
After the transmitter receives the DMX data, it selects the interference-free frequency band to send the
data. The red LED flashes, and the receiver changes the communication frequency band upward until it
receives the correct data with the same ID code (the indicator light flashes green at this time). The faster the DMX data, the faster the LED indicator flashes, and the communication is confirmed to be established.